Delfield 537-CR Manual do Utilizador descarregar pdf (Página 7)

DOUBLE 40-50 lb. ELECTRIC FRYER (BATTERY) SPECIFICATIONS

Deep Fat Fryer Battery- Shall be Pitco Model 2-SE14/SSTC-FD tube fired type. Fryer shall

have all standard Pitco features:

-480/3 phase

Solid State Control, Twin size baskets, Lift off basket hangers, 9” adjustable legs, Stainless steel

tank, front, door, and sides, Drain valve interlock, tank racks, clean out rod, fryer cleaning brush.

OPTIONS

- Filter Drawer Filtration System

- S/S tank covers

-filter powder- 1 CASE

-filter paper-1 CASE

-Fat Vat

ITEM # 21 CONVECTION STEAMER –5 PAN TABLE TOP W/STAND -BLODGETT

SN-5E-(1 EACH)

Furnish one (1) table top convection steamer, 5 pan, with stand, 208/3 phase.

Pressureless steam operation

OPTIONS: 28” stainless steel stand, water filtration system.

ITEM # 22- 30 GALLON TILT SKILLET WITH MANUAL TILT-BLODGETT MODEL

# BLT-E-(1 EACH)

Furnish one (1) 30 gallon tilt skillet.

Spring assisted hinged stainless steel cover with handle, no drip condensate guide, removable

pour strainer, manual control, #4 finish 10 gauge stainless, polished interior, coved corners,

thermostat, high temperature cut-off, WARRANTY; One year parts and labor

Options:

-208/3 phase

-Inside etching-gallon

-vented stainless steel pan cover

ITEMS # 26: TABLE TOP MIXER, 20 QUART HOBART A200 (2 EACH)

Furnish TWO (2) table top mixers.

A. ½ H.P. Motor: constant mesh gears with four operating speeds.

B. Voltage 120/60/1

C. To be furnished with the following:

20 qt. stainless steel bowl

12 qt. stainless steel bowl

Flat beaters – 20 qt. and 12 qt.

Wire whips – 20 qt. and 12 qt.

Bowl adapter – 12 qt.

Splash cover – 20 qt. and 12 qt.

ITEM # 27 MIXER STANDS (2 EACH)

Furnish 2 stationary mixer stands -30” long x 24” wide x 24 1/2” high, 14 gauge stainless steel

top with inverted vee edge on all sides with corners welded, ground and polished. Perimeter

braced with 1 1/2” x 1 1/2” x 1/8” galvanized iron angles. Bracing-stud bolted to underside of

top. 1 5/8” O.D. stainless steel legs fitted at top with fully enclosed stainless steel gussets welded

to underbracing. 18 gauge stainless steel undershelf with all edges double hemmed down 1 1/2”

and returned 3/4”. Shelf to be welded to the legs. Six (6”) legs, stainless steel.

Page 7 of 9

1 2 3 4 5 6 7 8 9

Comentários a estes Manuais

Sem comentários

Delfield 537-CR Manual do Utilizador Página 7

Comentários a estes Manuais

Manuais e produtos relacionados com não Delfield 537-CR