Delfield T14D Instruções de Operação descarregar pdf (Página 19)

Input SW2 (ALL 05) (door microswitch alarm)

Cause: Input active for more than 5 minutes with appliance in start status.

Door open (close door) Microswitch fault (replace the microswitch)

Beeper: Activated (3 seconds, then a pause of 30 seconds) until the mute button is pressed.

Display: Alternates message “ALL 05” with standard display

Reset: Press the mute push-button (with beeper o).

Automatically resets if input value returns to normal Alternatively, switch o the panel

then turn it back on (stand-by).

Input SW1 alarm (ALL 06) (T5 and T14D models only)

(High pressure switch) for all models

(Compressor thermal-magnetic switch) if installed

(Oil di. pressure switch) if installed

Cause: Input active for more than 5 seconds

Eect: Sets the appliance to STOP.

Reset the max. pressure switch, thermal-magnetic switch or dierential pressure switch.

Beeper: Activated (3 seconds, then a pause of 30 seconds) until the mute button is pressed.

Display: Alternates message “ALL 06” with standard display

Reset: Press the mute push-button (with beeper o) with no alarm cause displayed

Input SW3 alarm (ALL 08)

(Kriwan compressor automatic reset) only for T14D

(Thermostat on the discharge line)

Cause: Input active for more than ve seconds at least three times when appliance is in start mode

Eect: Compressor shuts down and resumes operation when input value returns to normal.

The appliance sets to STOP at third alarm.

Beeper: Activated (3 seconds, then a pause of 30 seconds) until the mute button is pressed.

Display/Led: Alternates message “ALL 08” with standard display

Reset: Press the mute push-button (with beeper o).

Alternatively, switch o the panel then turn it back on (stand-by).

Input Ht1 alarm (ALL 09) (Input in voltage 1 ... fuses).

Input Ht2 alarm (ALL 10) (Input in voltage 2 ... fuses)

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 43 44

Sem comentários

Delfield T14D Instruções de Operação Página 19